Digital Smart Power

Digital Measuring Devices

  • EM-07E-100D-DIN (Included C.T)
    EM-07E-100D-DIN (Included C.T)
    Model: Din Rail Type (10-100A)
    Brief:
    EM-07E-XXD-DIN Multimeters are designed to measure electrical values such as voltage, current, frequency, apparent power, and minimum, average, maximum and demand values of the load or loads in the system to which they are connected.

    ◉ Easy Installation and Operation with 71.5×61.5 Glass LCD Display
    ◉ With 3-Phase Voltage and 3-Phase Current Transformers
    ◉ Easy-To-Use Menu
    ◉ Remote Communication with RS485 (RS485 ModBus RTU)
    ◉ It Shows Per-Phase Apparent Powers (S)
    ◉ It Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase
    ◉ It Shows the Minimum, Maximum and Average Values
    ◉ It Shows Demand Values
    ◉ It has Protects Voltage, Currents and Frequency
    ◉ High/Low Voltage, Current, Frequency (Adjustable)
    ◉ Phase-to-Phase or Phase-to-Neutral Protection (Adjustable)
    ◉ It Show Phase Sequence
    ◉ Password Protected Menu
    ◉ 1 Relay Outputs (Adjustable)
     Inquire
  • EM-07E-60D-DIN (Included C.T)
    EM-07E-60D-DIN (Included C.T)
    Model: Din Rail Type (1-63A)
    Brief:
    EM-07E-XXD-DIN Multimeters are designed to measure electrical values such as voltage, current, frequency, apparent power, and minimum, average, maximum and demand values of the load or loads in the system to which they are connected.

    ◉ Easy Installation and Operation with 71.5×61.5 Glass LCD Display
    ◉ With 3-Phase Voltage and 3-Phase Current Transformers
    ◉ Easy-To-Use Menu
    ◉ Remote Communication with RS485 (RS485 ModBus RTU)
    ◉ It Shows Per-Phase Apparent Powers (S)
    ◉ It Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase
    ◉ It Shows the Minimum, Maximum and Average Values
    ◉ It Shows Demand Values
    ◉ It has Protects Voltage, Currents and Frequency
    ◉ High/Low Voltage, Current, Frequency (Adjustable)
    ◉ Phase-to-Phase or Phase-to-Neutral Protection (Adjustable)
    ◉ It Show Phase Sequence
    ◉ Password Protected Menu
    ◉ 1 Relay Outputs (Adjustable)
     Inquire
  • EM-07E-DIN
    EM-07E-DIN
    Model: Din Rail Type
    Brief:
    EM-07E-XXD-DIN Multimeters are designed to measure electrical values such as voltage, current, frequency, apparent power, and minimum, average, maximum and demand values of the load or loads in the system to which they are connected.

    ◉ Easy Installation and Operation with 71.5×61.5 Glass LCD Display
    ◉ With 3-Phase Voltage and 3-Phase Current Transformers
    ◉ Easy-To-Use Menu
    ◉ Remote Communication with RS485 (RS485 ModBus RTU)
    ◉ It Shows Per-Phase Apparent Powers (S)
    ◉ It Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase
    ◉ It Shows the Minimum, Maximum and Average Values
    ◉ It Shows Demand Values
    ◉ It has Protects Voltage, Currents and Frequency
    ◉ High/Low Voltage, Current, Frequency (Adjustable)
    ◉ Phase-to-Phase or Phase-to-Neutral Protection (Adjustable)
    ◉ It Show Phase Sequence
    ◉ Password Protected Menu
    ◉ 1 Relay Outputs (Adjustable)
     Inquire
  • EM-06
    EM-06
    Model: 96x96
    Brief:
    EM-06 When the device is energized, firstly you need to enter the current transformer value in order to see the current values accurately. You can set the current transformer value by entering the menu. If you make direct connection without current transformer under 5A, you need to ensure that the current transformer value is 5. The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.



    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-A96T
    SDM-A96T
    Model: 96x96
    Brief:
    SDM-A96T Digital three phase ammeters are designed to monitor the AC current value drawn by
    the loads continuously.
     Inquire
  • SDM-V96T
    SDM-V96T
    Model: 96x96
    Brief:
    SDM-V96T Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • SDM-F96
    SDM-F96
    Model: 96x96
    Brief:
    SDM-F96 Digital frequencymeter is designed to watch frequency between phase-neutral or phase-phase.
     Inquire
  • TPM-04-DIN
    TPM-04-DIN
    Model: Din Rail
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 1 Relay Outputs (Adjustable)
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
  • EM-60D (Included C.T)
    EM-60D (Included C.T)
    Model: 96x96
    Brief:
    The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.

    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-V96S
    SDM-V96S
    Model: 96x96
    Brief:
    SDM-V96S Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • SDM-A96TD (Included C.T)
    SDM-A96TD (Included C.T)
    Model: 96x96
    Brief:
    SDM-A96TD Digital three phase ammeters are designed to monitor the AC current value drawn by the loads continuously.
     Inquire
  • SDM-F72
    SDM-F72
    Model: 72x72
    Brief:
    SDM-F72 Digital frequencymeter is designed to watch frequency between phase-neutral or phase-phase.
     Inquire
  • TPM-04-60D-DIN (Included C.T)
    TPM-04-60D-DIN (Included C.T)
    Model: Din Rail Type (1-63A)
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 1 Relay Outputs (Adjustable)
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
  • EM-100D (Included C.T)
    EM-100D (Included C.T)
    Model: 96x96
    Brief:
    The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.

    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-V72S
    SDM-V72S
    Model: 72x72
    Brief:
    SDM-V72S Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • SDM-F48
    SDM-F48
    Model: 48x48
    Brief:
    SDM-F48 Digital frequencymeter is designed to watch frequency between phase-neutral or phase-phase.
     Inquire
  • SDM-A109T (Included C.T)
    SDM-A109T (Included C.T)
    Model: 96x96
    Brief:
    SDM-A109T Digital three phase ammeters are designed to monitor the AC current value drawn by the loads continuously.
     Inquire
  • TPM-04-100D-DIN (Included C.T)
    TPM-04-100D-DIN (Included C.T)
    Model: Din Rail Type (10-100A)
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 1 Relay Outputs (Adjustable)
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
  • EM-250D (Included C.T)
    EM-250D (Included C.T)
    Model: 96x96
    Brief:
    The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.

    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-V96
    SDM-V96
    Model: 96x96
    Brief:
    SDM-V96 Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • SDM-F36
    SDM-F36
    Model: 36x96
    Brief:
    SDM-F36 Digital frequencymeter is designed to watch frequency between phase-neutral or phase-phase.
     Inquire
  • SDM-A209T (Included C.T)
    SDM-A209T (Included C.T)
    Model: 96x96
    Brief:
    SDM-A209T Digital three phase ammeters are designed to monitor the AC current value drawn by the loads continuously.
     Inquire
  • TPM-04-250D-DIN (Included C.T)
    TPM-04-250D-DIN (Included C.T)
    Model: Din Rail Type (10-250A)
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 1 Relay Outputs (Adjustable)
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
  • SEM-06
    SEM-06
    Model: 96x96
    Brief:
    SEM-06 When the device is energized, firstly you need to enter the current transformer value in order to see the current values accurately. You can set the current transformer value by entering the menu. If you make direct connection without current transformer under 5A, you need to ensure that the current transformer value is 5. The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.



    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-A96
    SDM-A96
    Model: 96x96
    Brief:
    SDM-A96 Digital ammeter are designed to monitor the AC current value drawn by the loads
    continuously.
     Inquire
  • DF-DIN
    DF-DIN
    Model: Din-rail Type
    Brief:
    DF-DIN Digital frequencymeter is designed to watch frequency between phase-neutral or phase-phase.
     Inquire
  • SDM-V72
    SDM-V72
    Model: 72x72
    Brief:
    SDM-V72 Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • TPM-04SH-DIN
    TPM-04SH-DIN
    Model: Din Rail
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 2 Relay Outputs, 1 Digital Input
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
  • SEM-60D (Included C.T)
    SEM-60D (Included C.T)
    Model: 96x96
    Brief:
    The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.

    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-A72
    SDM-A72
    Model: 72x72
    Brief:
    SDM-A72 Digital ammeter are designed to monitor the AC current value drawn by the loads
    continuously.
     Inquire
  • SDM-V48
    SDM-V48
    Model: 48x48
    Brief:
    SDM-V48 Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • TPM-04SH-60D-DIN (Included C.T)
    TPM-04SH-60D-DIN (Included C.T)
    Model: Din Rail Type (1-63A)
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 2 Relay Outputs, 1 Digital Input
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
  • SEM-100D (Included C.T)
    SEM-100D (Included C.T)
    Model: 96x96
    Brief:
    The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.

    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-A48
    SDM-A48
    Model: 48x48
    Brief:
    SDM-A48 Digital ammeter are designed to monitor the AC current value drawn by the loads
    continuously.
     Inquire
  • SDM-V36
    SDM-V36
    Model: 36x96
    Brief:
    SDM-V36 Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • TPM-04SH-100D-DIN (Included C.T)
    TPM-04SH-100D-DIN (Included C.T)
    Model: Din Rail Type (10-100A)
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 2 Relay Outputs, 1 Digital Input
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
  • SEM-250D (Included C.T)
    SEM-250D (Included C.T)
    Model: 96x96
    Brief:
    The device shows the phase-neutral, phase-phase voltages, frequency, phase sequence and current values.

    •Easy Installation and Operation with 3x6 LED Display

    •3-Phase Current Transformers

    •Shows Voltage (V), Current (I) and Frequency (F) Values of Each Phase

    •Shows Phase Sequence
     
     Inquire
  • SDM-A36
    SDM-A36
    Model: 36x96
    Brief:
    SDM-A36 Digital ammeter are designed to monitor the AC current value drawn by the loads
    continuously.
     Inquire
  • DV-DIN
    DV-DIN
    Model: Din-rail Type
    Brief:
    DV-DIN Digital Voltmeter is designed to watch voltage between phase-neutral and phase-phase.
     Inquire
  • TPM-04SH-250D-DIN (Included C.T)
    TPM-04SH-250D-DIN (Included C.T)
    Model: Din Rail Type (10-250A)
    Brief:
      Energy analyzers are designed to measure and monitor electrical values. With the communication feature, energy measurements can be monitored and reported independently. With energy analyzers, analyzes such as energy quality, efficiency and unit cost calculation can be performed.
     
    ▲ Easy Installation and Operation with 71.5×61.5 Glass LCD Display.
    ▲ With 3-Phase Voltage and 3-Phase Current Transformers.
    ▲ Easy-To-Use Menu.
    ▲ It Shows Voltage and Current Harmonics Up To 31st Harmonics.
    ▲ Remote Communication with RS485 (RS485 ModBus RTU).
    ▲ It Shows Per-Phase Active Powers (P).
    ▲ It Shows Per-Phase Reactive Powers (Q, Inductive and Capacitive).
    ▲ It Shows Per-Phase Apparent Powers (S).
    ▲ It Shows Cosφ and Power Factor Values of Each Phase.
    ▲ It Shows Voltage (V) and Current (I) Values of Each Phase.
    ▲ It Shows Total Import and Export Active Energy (ΣkWh) Values.
    ▲ It Shows Total Inductive and Capacitive Reactive Energy (ΣkVArh) Values.
    ▲ It Shows the Minimum and Maximum Values.
    ▲ It Shows Demand Values.
    ▲ Can Reset the Energy Values.
    ▲ Password Protected Menu
    ▲ 2 Relay Outputs, 1 Digital Input
    ▲ Event Records (High/Low Voltage/Current, Voltage/Current Imbalance, THD-I)
     Inquire
Dongfeng Industrial Zone Yueqing, Zhejiang, 325604, P.R.China
Phone: +86-577-57171337 Fax: +86-577-57171336
info@samwha-dsp.com
COPYRIGHT © 2019 Hannuo Electric ALL RIGHTS RESERVED